Qualicoat Seaside finishes & Atlantic wind ratings in Ireland
Across Ireland's coastal counties and exposed upland plots, specifying Qualicoat Seaside marine powder coating (RAL 7016 Anthracite, RAL 9005 Jet Black or RAL 9016 White), A4-316 stainless steel hardware and Beaufort 10 to 11 (100 to 120 km/h) anchored frames prevents salt blistering and storm damage.
See what separates marine-grade Irish architectural extrusions from inland flat-pack imports.
Free, no obligation. One local specialist covering your area replies, not five.
- €3,800 to €6,500manual louvred aluminium pergola supplied & fitted (3m×3m to 3m×4m)
- €6,200 to €11,500motorised bioclimatic pergola supplied & fitted (3m×4m to 4m×6m)
- €11,500 to €21,000+full outdoor room with frameless sliding glass & ZIP blinds
- 100 to 120 km/hBeaufort 10 to 11 wind rating on 400×400×500mm C25/30 concrete pads
Qualicoat Seaside powder coating & Beaufort wind specs for Irish coasts
| Finish / Engineering Spec | Standard Inland Powder Coat | Qualicoat Seaside Marine Spec |
|---|---|---|
| Pre-treatment Etch | Standard degrease (<1.0 g/m²) | Heavy acid/alkaline etch (≥2.0 g/m²) + chrome-free passivation |
| Coating Thickness | 50 to 60 microns polyester | 60 to 80+ microns architectural super-durable polyester |
| Popular Irish RAL Colours | Stock grey only | RAL 7016 Anthracite, RAL 9005 Jet Black, RAL 9016 Traffic White |
| Fasteners & Pivot Pins | Zinc-plated or A2-304 steel | A4-316 marine-grade stainless steel & UV-stabilised nylon bushes |
| Recommended Exposure Zone | Sheltered inland (>10 km from sea) | All 15 Irish coastal counties & exposed Atlantic/Irish Sea sites |
Preventing filiform corrosion on cut aluminium mitres near the sea
Salt-laden south-westerly gales carry marine chlorides several kilometres inland across Galway, Kerry, Cork, Clare, Mayo, Donegal, Waterford, Wexford, Wicklow and coastal Dublin. While 6063-T6 aluminium never flakes away with red iron rust, airborne salt creeps underneath untreated saw-cut mitre joints and screw holes, pushing up worm-like blisters in cheap paint known as filiform corrosion. Specifying certified Qualicoat Seaside pre-treatment, sealing raw site-cut ends with two-part epoxy/chromate-free edge primer, and insisting on A4-316 stainless steel bolts prevents galvanic and filiform blistering.
Beaufort 10 to 11 storm management: blades closed or slightly cracked?
Heavy-duty structural pergolas bolted to 400×400×500mm C25/30 concrete pads are wind-tunnel rated to Beaufort 10 to 11 (100 to 120 km/h) with the roof blades locked flat. During Status Red violent storm warnings exceeding 120 km/h on exposed headlands, angling motorised bioclimatic blades to 45°–60° (and retracting fabric ZIP blinds fully up into their aluminium headboxes) vents extreme uplift pressure safely through the frame.
Get a supplied & fitted aluminium pergola quote for your patio
Pick your pergola type, patio base and county. Your request goes to one experienced aluminium pergola installer covering your county, who measures on site, checks wall fixings and pad footings, and quotes in writing.
Aluminium pergola 2026 cost guides, planning rules & coastal specs
Straight answers to what homeowners ask most: itemised 2026 costs, material specifications, drainage & planning rules, and what to check before you book.
More guides & resources: All guides & calculator hub · Technical & trade glossary · Frequently asked questions · All areas covered · Editorial standards · Contact · About this site
Coastal salt air, RAL colour & storm wind questions
Can an aluminium pergola be bolted straight onto 20mm porcelain patio slabs or composite decking?
No. 20mm porcelain flags and composite deck boards do not have the pull-out mass to resist uplift during 100 to 120 km/h (Beaufort 10 to 11) winter gusts. Installers diamond-core cleanly through existing patio slabs (or open a deck bay), excavate and pour 400×400×500mm C25/30 concrete pad foundations beneath each post position, and anchor the baseplates down with M12 or M16 stainless chemical resin studs before reinstating neat slab collars.
Will sea air rust or blister a dark grey aluminium pergola in coastal counties?
Extruded 6063-T6 structural aluminium cannot red-rust like steel, but standard inland powder coating can suffer white filiform salt blistering near the sea within three to five years. For properties within 10 km of the coast in Dublin, Wicklow, Wexford, Cork, Kerry, Galway, Clare, Mayo or Donegal, specify Qualicoat Seaside Class 1 or Class 2 marine-grade powder coating (in RAL 7016 Anthracite, RAL 9005 Jet Black or RAL 9016 White) paired with A4-316 marine stainless fixings.
Which RAL colour hides Irish rain marks and pollen most cleanly?
Fine-textured matte RAL 7016 Anthracite Grey is Ireland's most popular architectural pergola finish because it matches modern aluclad/uPVC sliding patio doors and hides Atlantic rain spots and spring tree pollen far more forgivingly than gloss white or smooth jet black. Twice-yearly washing with warm water and mild pH-neutral soap keeps Qualicoat Seaside finishes clean.
Aluminium pergola installers across all 26 counties
Enquiries from all 26 counties go to one specialist aluminium pergola installer covering your county, from Dublin, Cork, Galway and Kildare to Meath, Wicklow, Limerick, Wexford and Waterford. Pick your county below for local CSO housing figures, Met Éireann rainfall drainage notes and 2026 fitted prices. Compare all areas covered →
Pricing a louvred pergola or glass outdoor room for your patio?
One experienced installer covering your county surveys your wall height, drainage fall and concrete pad positions on site and gives you an itemised written quote.